3- Click on the Regional tab and look for the Control Timer Values (sec) section.2- Click on the Admin Login and then click on (switch to advanced view).1- First access the PAP2's web interface.If that doesn't work you need to contact the support staff in voip.ms. Note: However before changing that option, test if calling the number with an # at the end of the number works(e.g. Follow the next steps in order to change that setting: Changing the PAP2's Interdigit Long Timer value can help resolve the issue. If you ever experience some delay to hear the ringtone when you make outgoing calls with your PAP2.
#CONFIGURAR VOIPRAIDER NO CISCO PAP2 HOW TO#
Read the article called: Configure your Linksys VoIP ATA the right way! How to avoid the long delay to hear the ringtone Switch to the SIP tab and scroll down to RTP Parameters and set the follow setting:įound this link on configuring the PAP2-NA hardware to work better in North America and specifically with VOIP.ms. (911S0|310xxxx|xxxxxx|1xxxxxxxxS0|xxxxxxxxS0|*xx|***xxx|*xx.|11|822|0|00|4xxx|**275*x.|xxxxxxxxxxxx.)Ĭlick here for more information on Linksys dial plansĬlick on the "Save Settings " button at the bottom of the form.
#CONFIGURAR VOIPRAIDER NO CISCO PAP2 CODE#
Replace the 555 digits in the following line by the area code of your choice and copy the line, including parenthesis, in the Dialplan field in Line 1 Tab at the bottom of the page: Here is the one we recommend:Īt the bottom of Line 1 TAB, you will find a field called Dial Plan You can configure your adapter with a better dial plan, allowing faster dialing of 10 digits number (Local US/Canada) and also enable 7 digits dialing in one area code of your choice. Password: ******** (Type in the account password) User ID: 100000 (Replace with your VoIP.ms username) Proxy: (You can choose any of our multiple VoIP.ms servers)ĭisplay Name: John Smith (Replace with your name or company name) Under the LINE 1 Tab, Find the following fields and fill them with the following information You should now see the web interface of your Linksys/Sipura.Ĭlick on the link "Admin", and once the page has reloaded, click again on the link "Advanced View". (example ) Replace 192.168.1.2 by the IP Address your device is currently using. Using your favorite web browser from a computer on the same network, point the address to the IP address of your adapter. The system should now playback the IP Address your device has been assigned. Once this is done, dial: 110# (110 followed by a square) To do this, pick a phone connected on Line 1 and do the following:
The first step is to find out what IP Address your adapter is currently using. 3 How to avoid the long delay to hear the ringtone.
0 kommentar(er)
